返回首页 |资讯 |技术 |产品 |展会 |品牌 |论坛 |专题 |视频|人才 |MRO |导航
登录|注册
  当前位置:网站首页 >> 产品中心 >> 传感器 >> 位移传感器

超声波传感器-UR500系列

当前价格:800
最小起订:1
所在地址:四川省成都市
发布时间:
有效期至:180
点击这里给我发消息
手机号码:1368834****查看完整电话
  • 商品详细
  • 声明:以下内容未经核实,风险自负!

Precautions for Safe Use 使用安全说明


Observe the following precautions to ensure safety.
1. Do not use the Sensor in Locations subject to explosive or flammable gases.
1. 请不要在易爆或易燃气体的环境中使用超声波传感器.
2. Do not use the Sensor in environments subject to exposure to water, oil, chemicals etc.
2. 请不要在水,油和有腐蚀化学物质中使用超声波传感器.
3. Do not attempt to disassemble, repair, or modify the Sensor.
3. 请不要拆解,维修和改装超声波传感器.
4. Connect in the specified wiring order when connecting the sensor terminals.
4. 安装之前,务必确认正确的连线方式。
5. To ensure safety in operation and maintenance, do not install the Sensor near High-voltage equipment or power devices.
5. 为了安全运转和维护,请不要安装将超声波传感器安装在高电压或电源设备附近。
6. Do not use the Sensor in locations subject to direct vibration or impact.
6. 请不要将超声波传感器安装在有共振和受共振影响的地方
7. Do not connect or disconnect connector or attempt wiring work while power is supplied. The product may be damaged and electric shock may result.
7. 请不要带电插拔本产品.
8. When disposing of the Sensor, treat it as industrial waste.
8. 在报废超声波传感器时,请按照电子工业品标准回收处理.


Precautions for Correct Use 正确使用说明
Please observe the following precautions to prevent failure to operate, malfunction, or undesirable effects on product performance.
1. The sensing distance is impaired if the sensing surface of the sensor is splashed with water droplets.
1. 请及时除去超声波探头表面的水滴,以免影响超声波探测的距离。
2. The sensor senses solids, liquids, and powder. However, the sensor capabilities of the sensor fluctuate depending on the status of the sensing object surface.
2. 超声波传感器用于探测固体,液体和粉末. 但是探测的距离和效果会受到物体介质表面状态影响。
3. For scanning objects with flat and smooth surfaces, the sensors should be mounted at an angle of 90+3 to the surface.
3. 在探测平整和表面光滑的物体时, 安装超声波传感器时,建议探头正对物体表面90度正负3度以内为。


4. Ambient temperature and humidity of the sensor 
  Generally, acoustic velocity fluctuates roughly 0.17% with respect to a temperature change og 1c.
  Also, a fluctuation of roughly 1% occurs due to dry air or humidity in a saturated sate. These fluctuations affect the measurement distance of the sensor. Take these points into consideration when using object exceeds 80 c.
4. 温度和湿度对超声波传感器的影响
  一般来说,当温度变化1度时,声速会随着变化大约0.17%。同时,在一定的模型中,也会随着干空气和湿度变化影响大约1%。这些变化会影响超声波传感器检测的精准度。请不要在超过80度的环境中使用超声波传感器。
5. Ambient atmosphere
 Ultrasonic sensors use the air as their transmission medium. For this reason, if local temperature differences are present, reflection or diffraction occurs at the boundary surface, or the sensing area will change in windy locations, resulting in malfunction. Accordingly, avoid using ultrasonic sensors near air curtains or blowers.
5. 大气的影响
 超声波传感器是通过空气为介质来工作的. 如果在传输过程中有温度变化、反射或者衍射情况发生,或者强风都会引起超声波传感器的异常。请问避免在有强风的环境中使用超声波传感器。
6. Mutual Interference 
 When installing two or more Sensor side by side, ensure that the minimum distances given in the following table are maintained.
6. 相互之间的影响
在没有使用同步功能的情况下,相邻位置安装两只和两只以上的超声波传感器时,为避免相互之间的干扰,需要注意最小安装距离。


7. Do not use paint thinner, benzene, acetone, or kerosene for cleaning. 
Precautions for Safe Use 使用安全说明


Observe the following precautions to ensure safety.
1. Do not use the Sensor in Locations subject to explosive or flammable gases.
1. 请不要在易爆或易燃气体的环境中使用超声波传感器.
2. Do not use the Sensor in environments subject to exposure to water, oil, chemicals etc.
2. 请不要在水,油和有腐蚀化学物质中使用超声波传感器.
3. Do not attempt to disassemble, repair, or modify the Sensor.
3. 请不要拆解,维修和改装超声波传感器.
4. Connect in the specified wiring order when connecting the sensor terminals.
4. 安装之前,务必确认正确的连线方式。
5. To ensure safety in operation and maintenance, do not install the Sensor near High-voltage equipment or power devices.
5. 为了安全运转和维护,请不要安装将超声波传感器安装在高电压或电源设备附近。
6. Do not use the Sensor in locations subject to direct vibration or impact.
6. 请不要将超声波传感器安装在有共振和受共振影响的地方
7. Do not connect or disconnect connector or attempt wiring work while power is supplied. The product may be damaged and electric shock may result.
7. 请不要带电插拔本产品.
8. When disposing of the Sensor, treat it as industrial waste.
8. 在报废超声波传感器时,请按照电子工业品标准回收处理.


Precautions for Correct Use 正确使用说明
Please observe the following precautions to prevent failure to operate, malfunction, or undesirable effects on product performance.
1. The sensing distance is impaired if the sensing surface of the sensor is splashed with water droplets.
1. 请及时除去超声波探头表面的水滴,以免影响超声波探测的距离。
2. The sensor senses solids, liquids, and powder. However, the sensor capabilities of the sensor fluctuate depending on the status of the sensing object surface.
2. 超声波传感器用于探测固体,液体和粉末. 但是探测的距离和效果会受到物体介质表面状态影响。
3. For scanning objects with flat and smooth surfaces, the sensors should be mounted at an angle of 90+3 to the surface.
3. 在探测平整和表面光滑的物体时, 安装超声波传感器时,建议探头正对物体表面90度正负3度以内为。


4. Ambient temperature and humidity of the sensor 
  Generally, acoustic velocity fluctuates roughly 0.17% with respect to a temperature change og 1c.
  Also, a fluctuation of roughly 1% occurs due to dry air or humidity in a saturated sate. These fluctuations affect the measurement distance of the sensor. Take these points into consideration when using object exceeds 80 c.
4. 温度和湿度对超声波传感器的影响
  一般来说,当温度变化1度时,声速会随着变化大约0.17%。同时,在一定的模型中,也会随着干空气和湿度变化影响大约1%。这些变化会影响超声波传感器检测的精准度。请不要在超过80度的环境中使用超声波传感器。
5. Ambient atmosphere
 Ultrasonic sensors use the air as their transmission medium. For this reason, if local temperature differences are present, reflection or diffraction occurs at the boundary surface, or the sensing area will change in windy locations, resulting in malfunction. Accordingly, avoid using ultrasonic sensors near air curtains or blowers.
5. 大气的影响
 超声波传感器是通过空气为介质来工作的. 如果在传输过程中有温度变化、反射或者衍射情况发生,或者强风都会引起超声波传感器的异常。请问避免在有强风的环境中使用超声波传感器。
6. Mutual Interference 
 When installing two or more Sensor side by side, ensure that the minimum distances given in the following table are maintained.
6. 相互之间的影响
在没有使用同步功能的情况下,相邻位置安装两只和两只以上的超声波传感器时,为避免相互之间的干扰,需要注意最小安装距离。


7. Do not use paint thinner, benzene, acetone, or kerosene for cleaning. 

   普通用户
    公司信息已审核

成都锐科软控科技有限公司

公司地址:

主营产品:超声波传感器,移动设备防撞系统产品...

  联系人:

查看完整电话

  

信用档案|最新供应|公司介绍

您可能感兴趣的

相关产品

同类商品展示

免责声明:本站所展示的公司信息、产品信息及其他相关的信息均由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。本站对此不承担任何保证责任。

友情提醒: 建议您在购买相关产品前务必确认供应商资质及产品质量,交易有风险,请谨慎对待,以免因此造成自身的损失。

本站声明:严禁任何单位和个人模仿、转载、抄袭及冒名中国工业电器网(cnelc.com)

中国工业电器网 | 诚聘英才 | 关于我们 | 会员服务 | 广告服务| 意见/业务 | 帮助中心 | 在线投稿 | 友情链接 | 联系我们 |网站地图

 会员服务:点击这里给我发消息 广告软文合作:点击这里给我发消息 关键词推广:点击这里给我发消息 战略合作:点击这里给我发消息 新闻投稿:点击这里给我发消息

中国工业电器网服务热线:400-688-6377 合作电话:021-39550999 传真:021-59142222 邮编:201812 信箱:cn@cnelc.com新闻投稿邮箱:news@cnelc.com

上海总公司地址:上海 金园一路999号(中国工业电器大厦) 法律顾问:浙江海昌律师事务所 江律师

增值电信业务经营许可证:沪B2-20180642

上海易电网络科技有限公司 版权所有 2012-2020

沪ICP备10003932号-15

贵州体彩网 传奇私服 吉林快3 - 一定牛 北京11选5 吉林体彩网www.bfmdk.com